john Floor Lamps June 19th, 2018 - 21:43:01
One of the best reading lamps in the world was also designed circa 1920. It has been highly imitated but it still remains unchallenged. The Bridge Arm Floor Lamp or Bridge Lamp has a typical floor lamp design with metal base and upright standard which can take the form of various types of decorated tubing twisted iron rods etc. At the top of the standard is a decorative cast metal arm with a graceful arc or curvature which ends with an electrical socket pointing downward and covered by a fabric or glass shade. This has the effect of offsetting the light by about 14-18" from the upright standard at the same time lowering it so that it is closer to the reading material or work project. The result is an excellent reading lamp or work lamp which places the light bulb very near the task at hand. Many of these Bridge Arm Floor Lamps have convenient pull chains which hang below the bottom of the lamp shade for ease of operation.
Floor lamps can be defined as self- supporting and lighting fixtures. These are most often used as reading lamps and also as auxiliary light sources in a particular office space or living rooms. All modern floor lamps make good use of a solid base that is usually for supporting the lamp. Another other shield or a lamp shade is also used to diffuse and distract the light that is produced by all the bulbs. There are also various or multiple settings for different levels of illumination. These types of lamps are often used in a conjunction with the overhead lights in order to provide additional illumination and also a visual interest for the purpose of reading.
This is usually a critical point because many folks stick a floor lamp too close to other lamps or tall pieces which only diminishes its beauty and effectiveness. Simply do not bunch furniture especially lighting. Due to the fact a contemporary floor lamp has a small footprint resist the temptation to set it anywhere. Use your gut feeling meaning if you think it may be just a little too much it probably is so move it.
Aside from rewiring the old floor lamp you should also make sure that the base is stable. Nowadays floor lamps have to meet UL standards where the bases are heavier so that it won`t easily tip over. However ages ago antique floor lamps do not have a standardized base that can`t easily be tipped over. Accidental tipping over of floor lamps can lead to unwanted fire accidents. That is why it is very important to check whether the antique floor lamp you plan to buy is safe in terms of its structure.