Home / Floor Lamps / john lewis floor lamps / Wooden Tripod Floor Lamp Walnut Wood Austin Base Next John Lewis Lamps Copper Standing Shades Dining Table Lights Uk Tall Lounge Glass Pendant Light Lantern Zandra
john Floor Lamps June 18th, 2018 - 03:17:00
Aside from rewiring the old floor lamp you should also make sure that the base is stable. Nowadays floor lamps have to meet UL standards where the bases are heavier so that it won`t easily tip over. However ages ago antique floor lamps do not have a standardized base that can`t easily be tipped over. Accidental tipping over of floor lamps can lead to unwanted fire accidents. That is why it is very important to check whether the antique floor lamp you plan to buy is safe in terms of its structure.
A few common features of antique lamps include the stained-glass lampshade brass finishes and intricate designs. When one is interested in truly decorating their home with antique floor lamps genuine specimens may cost quite a bit such as French antique lamps carrying a price tag of more than thousands of dollars. Usually an antique or antique-styled floor lamp is selected because of its look and fit within a setting rather than bringing light into the room.
The brightest lamp that you can purchase today in any store was designed and made circa 1920. It is also the most versatile lamp that you can buy anywhere. Further it will outlast most any modern lamp that you can find at any price. This antique floor lamp is known by a numerous names such as: 6 Way Floor Lamp Reflector Floor Lamp and "JUNIOR". The design begins with a heavy metal base sometimes highly decorated with an upright tubing leading up to a central electrical socket surrounded by 3 arm lights (4 lights total). The central light takes a 3 way bulb (low-medium-high) that is often a MOGUL size which is larger than a standard socket with higher wattage (100-200-300 watts). The three arm lights are controlled by a switch that can turn on separately just 1 2 or all 3 of the arm lights. Further many of these JUNIORS had a small light under the base which provided a very subtle night time floor light operated by a foot switch mounted on the side of the base. As if this were not enough the central top socket is encased in a large metal cup which holds a white waffle patterned glass bowl that reflects light upward to bounce of the ceiling. A fabric or silk shade (also called JUNIOR shade) rests upon the glass reflector bowl to reflect light downward for reading. A single arm light can provide a simple night light or at it brightest setting it can light up an entire room. There is no brighter lamp or more versatile lamp available anywhere today and it was designed and made nearly 100 years ago!
One of the best reading lamps in the world was also designed circa 1920. It has been highly imitated but it still remains unchallenged. The Bridge Arm Floor Lamp or Bridge Lamp has a typical floor lamp design with metal base and upright standard which can take the form of various types of decorated tubing twisted iron rods etc. At the top of the standard is a decorative cast metal arm with a graceful arc or curvature which ends with an electrical socket pointing downward and covered by a fabric or glass shade. This has the effect of offsetting the light by about 14-18" from the upright standard at the same time lowering it so that it is closer to the reading material or work project. The result is an excellent reading lamp or work lamp which places the light bulb very near the task at hand. Many of these Bridge Arm Floor Lamps have convenient pull chains which hang below the bottom of the lamp shade for ease of operation.